CalorimeterHit
collectionsSee: Description
Class | Description |
---|---|
CalorimeterHitUtilities |
This is a simple set of utility methods for creating CalorimeterHit objects.
|
DatabaseDAQConfigDriver |
Driver
DatabaseDAQConfigDriver is a variant of the
standard DAQ configuration driver that reads configuration data from
the run database instead of either local files or an EvIO file. |
Ecal3PoleFunction |
"3-Pole Function:" x**2 * exp(-x/tau)
Here x is time, and we have pedestal and time offsets, and it's normalized:
PEDESTAL + INTEGRAL / WIDTH^3 / 2 * (TIME-TIME0)**2 * exp(-(TIME-TIME0)/WIDTH)
|
EcalCalibrationsDriver |
This Driver will generate a
EcalCalibration collection
from the ADC value distributions of raw ECAL data. |
EcalConverterDriver | |
EcalCosmicPulseFitter |
Fit ECal FADC Mode-1 waveform with a "3-pole" function for extraction of
pulse integral and time.
|
EcalEdepToTriggerConverterDriver |
This file can be used on Monte Carlo and excludes pile up.
|
EcalGain | |
EcalGainDriver | |
EcalOnlineRawConverter |
EcalOnlineRawConverter handles the conversion of raw
hits of all modes to energy hit CalorimeterHit objects. |
EcalOnlineRawConverterDriver |
This class is used to convert between collections of
RawCalorimeterHit
and RawTrackerHit , objects with ADC/sample information, and
collections of CalorimeterHit , objects with energy/time information. |
EcalPedestalCalculator |
Calculate pedestals from Mode-7 Data.
|
EcalPulseFitter |
Fit ECal FADC Mode-1 waveform with a "3-pole" function for extraction of pulse integral and time.
|
EcalRawConverter |
This class is used to convert between
RawCalorimeterHit or
RawTrackerHit , objects with ADC/sample information, and
CalorimeterHit , an object with energy+time information. |
EcalRawConverter2 |
This class is used to convert between
RawCalorimeterHit or
RawTrackerHit , objects with ADC/sample information, and
CalorimeterHit , an object with energy+time information. |
EcalRawConverter2Driver |
This
Driver converts raw ECal data collections to CalorimeterHit collections
with energy and time information. |
EcalRawConverter3 |
This class is used to convert between
RawCalorimeterHit or
RawTrackerHit , objects with ADC/sample information, and
CalorimeterHit , an object with energy+time information. |
EcalRawConverter3Driver |
This
Driver converts raw ECal data collections to CalorimeterHit collections
with energy and time information. |
EcalRawConverterDriver |
This
Driver converts raw ECal data collections to CalorimeterHit collections
with energy and time information. |
EcalReadoutToTriggerConverterDriver | |
EcalRunningPedestalDriver |
This
Driver takes Mode-1 or Mode-7 ECal data and computes a running pedestal average for every channel. |
EcalTimeCorrectionDriver |
Perform time walk correction on ECal hits and create new collection of hits with corrected time.
|
EcalTimeWalk | |
EcalTriggerFilterDriver |
Changes ECal hit IDs to match what the test run trigger sees.
|
EcalUtils | |
FADCConverterDriver | |
FADCGenericHit |
GenericObject to store hit information for FADC channels not corresponding to
ECal crystals.
|
HitExtraData | |
HitExtraData.Mode7Data | |
IterateGainFactorDriver |
This driver reads in a hit collection and outputs a new hit collection with energies that have been multiplied by an
improved gain correction factor.
|
CalorimeterHit
collectionsCopyright © 2019. All rights reserved.